Elac DS1200-GB Subwoofer 2x 12" Dual Driver
The Elac DS1200-GB takes the top position in the new Varro series. Precise, concise, fast, breathtaking depth and dynamics. The DS1200-GB can also be controlled with the app and, if desired, can be operated wirelessly with the NAVIS transmitter. The wireless receiver is built into the housing. An absolute highlight.
The Elac DS1200-GB subwoofer works with 2x 12" dual drivers and produces a breathtakingly powerful and balanced bass. In the new Elac Varro series, the DS1200-GB takes over the top class of subwoofers.
Experience the incredible sound of the legendary Dual Reference Series subwoofer. This single subwoofer can provide your sound system with smooth, precisely tuned, crystal clear bass. The Elac DS1000-GB features cutting-edge technology and delivers a clean, balanced bass experience with two powerful bass drivers. The subwoofer delivers excellent linearity, producing tight and precise bass with minimal distortion. Perfectly tuned for the most demanding movies or music.
- Powerful BASH amplifier with dual 4-channel DSP and 32-bit DACs
- Auto EQ system
- App control
- 36mm case
- Internally dampened and internally braced eliminates unwanted resonances
- High-gloss lacquered housing
- Aluminium sandwich driver
- Integrated wireless receiver for wireless operation with Navis Transmitter (accessory)
Elac DS1200-GB subwoofer offers a very advanced driver design.
High Excursion (HEX) surround technology allows for greater extrusion and less distortion. However, to facilitate the extra movement, longer voice coils were required. This meant that the aluminum sandwich technology was too heavy. To improve efficiency, the drivers were designed with cutouts placed in the paper cone before being bonded to the aluminum cone.
The Elac DS1200-GB features two separate woofers mounted opposite each other. This configuration, along with the increased amplifier power, not only increases SPL but also significantly reduces cabinet vibrations.
The cast backrest ensures stability under load, and a large magnet completes the cleverly designed driver.
Reference subwoofer with Bash amplifier
The discrete implementation of these tracking amplifiers allows for maximum voltage swing, delivering all the required power and additional dynamic power across the entire operating range of the woofers.
Auto EQ and improved app control
Placing a subwoofer can be a serious challenge. This is because they are usually placed in corners or hidden next to sofas, causing reflections, peaks or complete cancellations. The principle of ELAC's Auto-EQ is to remove the effect of the room by taking a near-field measurement and comparing it with a far-field (listening position) measurement.
This allows greater freedom to place the subwoofer where it meets all requirements. You can calibrate the Elac DS1200-GB subwoofer excellently with the 3rd generation "Sub Control 3.0" app with auto-EQ room correction. From now on, the app also offers the option of setting up more than one subwoofer.
Technical data of the Elac DS1200-GB subwoofer
Type | active subwoofer |
principle | closed |
Nominal/music power (W) | 1200/2400W |
Transmission range (Hz) | 17Hz to 150Hz
14 Hz to 150 Hz (InRoom) |
Crossover frequency (Hz) | 40Hz to 150Hz |
Inputs | RCA Line Level, Speaker Level
USB (firmware updates) 12 Volt Trigger Ethernet (RJ45) IP Control XLR Balanced (Left&Right) |
Maximum Output Level, SPL | 118dB |
Stand-by circuit | < 2.0 watts |
Amplifier Technology | BASH Amplifier |
App control | iOS and Android |
Dimensions (HxWxD) | 421x482x416mm |
Weight | 37.9kg |
Control your Elac DS1200-GB subwoofer wirelessly with the Navis transmitter. The optimal subwoofer solution for rooms where you cannot lay a subwoofer cinch cable.
Technical data of the NAVIS transmitter
- Height x width x depth: 39 x 92 x 94 mm
- Weight: 0.2kg
- Type: 2.4 uncompressed audio, CD quality
- Frequency range: <5Hz … 22.1 kHz
- Inputs: 2 x RCA (Right / Left)
- Supply voltage: 7.5 V DC
- Accessories included: Power supply