KRIX CINEMATIX 3-way LCR horn system

3-way double 15″ floorstanding speaker with high and mid-range horn 1000W, 4 ohms, 38Hz – 16Khz +/-3db, 101db Dimensions: 190 x 67 cm Depth: 46 cm requires 2-channel DSP amplifier, e.g. NEAR 7XL Room depths up to 30m!

KRIX CINEMATIX 3-way LCR horn system

The KRIX CINEMATIX 3-way speaker delivers incredibly dynamic and effortless performance. Using commercial cinema technology, the Cinematix dual woofers are able to produce even higher sound pressure levels with pristine fidelity and extremely low distortion. A special midrange driver increases performance and ensures excellent speech intelligibility.

• High acoustic performance
• Excellent speech intelligibility
• Massive dynamic range

EXPERIENCE DYNAMICS

These serious main front speakers are designed for the ultimate home theater experience. Its 3-way, bi-amped design is suitable for medium to large rooms, and the additional dedicated midrange overcomes the demands placed on the treble component and increases performance. By dividing the signal into three dedicated sections, the speaker produces outstanding speech intelligibility in the critical range of 1kHz - 3kHz.

The Cinematix features two 380mm paper cone drivers with 77mm voice coils for increased linear excursion and powerful ventilated magnets for low distortion. The specially developed woofer offers excellent bass performance, high peak program capacity and high efficiency - it is suitable for very high sound pressure levels. The solid ferrite magnet structure contains components designed for maximum efficiency. The symmetrical gap geometry combined with the large linear voice coil travel ensures minimal distortion at all levels.

The dedicated midrange is reproduced by a Krix-developed 90 x 40 degree constant polar pattern horn with a 77mm neck diameter, driven by a 165mm paper cone driver with a large voice coil and neodymium magnet.

For high frequencies, the Cinematix has Krix's patented 90 x 40 short-throw horn, which offers optimal dispersion of 90 degrees horizontally and 40 degrees vertically, which is kept constant across the entire working bandwidth. It is powered by a 25mm neck compression driver, a 32mm edge-wound aluminum voice coil and a Nomex tensioner. The constant directivity means far less sound is reflected from side walls and ceilings, ensuring sound energy is focused directly onto the listening position, resulting in better clarity.

The horn assemblies are attached to the bass housing with a sturdy mounting bracket that can be tilted both vertically and horizontally. The electronic filter network for the horn section is housed in a separate, well-ventilated housing mounted on the rear of the midrange horn. Professional, tight tolerance components ensure the system can handle the high sound pressure levels that well-recorded music and films require. A separate electronic crossover is required between the woofer and the horn elements.

For the ultimate cinema experience at home, play it via Krix.

Home cinema can't be bigger or better than the Series X.

Built on decades of research and development experience, Krix X Series speakers and subwoofers feature the same technology used in Krix's internationally recognized commercial cinema speakers. They are designed for use in dedicated home theaters longer than 6 meters.

The X Series speakers require slightly more space at the front of your cinema room than the SX or MX Series and are designed for use behind large, acoustically transparent screens. They're not for small spaces... or for the faint of heart.

Larger rooms tend to be filled with more seats - and you want every viewer to get the most out of the experience. All Series

High power handling, a smooth frequency response and an incredible dynamic range ensure that your special cinema emits the highest quality cinema sound.