KRIX MX-20 basic module

Designed for dedicated home theaters with an acoustically transparent screen, the KRIX MX-20 base module reproduces your favorite movie soundtracks with the highest definition and accuracy - directly across the picture and into your seat.

Advantages of the Krix MX-20 basic module:

• Low installation depth
• fabulous performance behind an acoustically transparent screen
• Sound absorption incorporated in the front
• Horn speaker - very balanced sound
• easy installation and good alignment capabilities

For a wall of sound that crashes through the big screen, the KRIX MX-20 Base Module delivers the impact you're looking for. With every aspect optimized to deliver the most faithful reproduction of movie soundtracks, from whispers to the explosion immediately afterward, these modules offer a true commercial cinema experience in the home.

The KRIX MX-20 base module is designed for cinema rooms from four to seven meters in length. This system consists of five modules, all of the same height and a slim line depth of just 295 mm for easy installation in a wall cavity.

The front baffle of each module is covered with an acoustic absorption material to absorb sound reflected from the back of the screen or the room itself. This is a great help in acoustically treating the room to ensure better intelligibility and overall sound performance.

The main speakers feature a 255mm bass-midrange driver with a 50mm voice coil designed to provide low harmonic distortion, especially in the critical midrange range.

The tweeter unit is a damped, high-performance, doped 26 mm fabric dome tweeter coupled with a proprietary Krix waveguide to ensure optimal dispersion across the entire operating bandwidth.

Each subwoofer contains a large 380mm paper cone driver with a 100mm copper voice coil, dual spider and vented magnet system.

For the ultimate cinema experience at home!

Specifications of the KRIX MX-20 base module

LCR loudspeaker modules
Frequency range	40Hz-20kHz in surround sound
Resilience	100 - 500 Watt RMS recommended amplifier power
sensitivity	97dB for 2.83 volts at 1 meter distance
Impedance	8 ohms
configuration	2-way
Housing type	Bass reflex, front ventilated
Bass driver	Single 255mm (10") paper cone driver. 50mm (2") voice coil wound on high performance Kapton bobbin, with vented magnet assembly and copper shorting ring for low distortion
High frequency driver	26 mm (1") doped fabric dome with large roll bead. Ferrofluid cooled. Coupled to a 90 x 40 short-throw waveguide developed by Krix
Input terminals	Gold-plated spring terminals
Dimensions	1220mm high x 365mm wide x 295mm deep (2210mm wide with subwoofer modules)

Subwoofer Module
Frequency range	25Hz-200Hz in surround sound
Resilience	200 - 1400 Watt RMS recommended amplifier power
sensitivity	96dB for 2.83 volts at 1 meter distance
Impedance	4 ohms
Housing Type	Bass reflex, downward valve
Bass driver	Single 380mm (15") paper cone driver. 100mm (4") edge wound copper voice coil with double spider and vented magnet
Input terminals	High-quality gold-plated spring terminals
Dimensions	1220 mm high x 550 mm wide x 295 mm deep (2210 mm wide including LCR modules)

System recommendations
Minimum screen size 16:9	100″ (2210mm x 1243mm)
Minimum screen size 21:9	120″ (2806mm x 1184mm)
Recommended room depth	4m - 7m